Home   |   Education   |   Membership   |   News   |   FAQs   |   About Us
Members:   Login   |   Register
YouTube   Twitter   LinkedIn   AWC Store
American Wood Council
  • Energy Code Provisions in H.R. 3586 Enhance Product Neutrality

    Jul 15, 2019
    WASHINGTON – American Wood Council (AWC) Vice President, Government Affairs Andrew Dodson issued the following statement regarding the introduction of The Energy Savings and Building Efficiency Act (H.R. 3586). The bill encourages product neutrality in building energy codes and defines the role of the Department of Energy (DOE) as a technical advisor in the development of model energy codes and subsequent state adoption. It is co-sponsored by Reps. Kurt Schrader (D-OR), Bill Flores (R-TX) leading the bill, and Tom O’Halleran (D-AZ), Lou Correa (D-CA) and Collin Peterson (D-MN).
    Full story
  • AWC’s Flame Spread Guide Updated

    Jul 08, 2019
    LEESBURG, VA. – The American Wood Council (AWC) has released an updated version of Design for Code Acceptance (DCA) 1 - Flame Spread Performance of Wood Products Used for Interior Finish.
    Full story
  • Forest Products Manufacturers Applaud New EPA Permit Streamlining Rule

    Jun 26, 2019
    WASHINGTON – American Wood Council President and CEO Robert Glowinski and American Forest & Paper Association President and CEO Donna Harman issued the following statement regarding the Environmental Protection Agency’s (EPA) issuance of a new rule to reclassify certain major sources as area sources under the Clean Air Act. EPA Administrator Andrew Wheeler announced the proposed rule on “Once In, Always In” on June 25, 2019.
    Full story
  • AWC Launches Fire Service Advisory Council

    May 07, 2019
    LEESBURG, VA. – The American Wood Council (AWC) has launched its Fire Service Advisory Council, a national group of fire service experts that will provide AWC and the wood products industry with broad-based advice and guidance on fire safety strategies and tactics regarding wood construction, wood products, and the wood product industry’s engagement with the fire service. The Fire Service Advisory Council provides the opportunity for a productive dialogue with the nation’s Fire Service to address reducing fires in wood construction. The Fire Service Advisory Council is also intended to help identify effective training materials for the Fire Service and enhance the relationship between the Fire Service and wood products industry. The first Fire Service Advisory Council conference call took place on April 30th. This will be followed by a fall in-person meeting during which AWC and the Fire Service Advisory Council will solidify an action plan to drive council activities into 2020 and beyond.
    Full story
  • AWC relaunches WoodAware as a resource for Fire Service

    May 06, 2019
    LEESBURG, VA. – The American Wood Council this week relaunched WoodAware (www.woodaware.org), an informational website on wood construction for the fire service. New additions to the WoodAware site include a section on the International Code Council (ICC) tall mass timber code changes recently approved for inclusion in the 2021 ICC building codes.
    Full story
  • 2x6 Wood Exterior Wall Passes Fire Test – Added to Fire-Resistance-Rated Wood Assemblies

    Apr 01, 2019
    LEESBURG, VA. – The American Wood Council (AWC) has released an update to "Design for Code Acceptance (DCA) 3 - Fire-Resistance-Rated Wood Floor and Wall Assemblies." The updated DCA 3 can be found on the AWC website: https://www.awc.org/codes-standards/publications/dca3.
    Full story
  • AWC applauds Utah’s recognition of tall mass timber

    Mar 26, 2019
    LEESBURG, VA. – American Wood Council (AWC) President and CEO Robert Glowinski issued a statement following the Governor’s signature on legislation to require the state’s Uniform Building Code Commission to recommend building standards for use of mass timber in residential and commercial building construction. The Utah House of Representatives passed the bill (H.B. 142) on February 12th and the Senate passed it on February 22nd. It was signed into law by Governor Herbert on March 22nd
    Full story
  • AWC releases 2018 Manual for Engineered Wood Construction

    Feb 24, 2019
    LEESBURG, VA. – The American Wood Council (AWC) has released the 2018 Manual for Engineered Wood Construction, which contains design information for structural lumber, glued laminated timber, structural-use panels, cross-laminated timber (CLT), poles and piles, I-joists, structural composite lumber, and connections.
    Full story
American Wood Council
222 Catoctin Circle SE, Suite 201
Leesburg, VA 20175

- Public Policy Office -
1101 K Street NW, Suite 700
Washington, DC 20005
- Phone -
General: 202-463-2766
General Fax: 703-771-4079
Publications: 800-890-7732
Publications Fax: 412-741-0609
- Email -
Technical: info@awc.org
Publications: publications@awc.org
Education: education@awc.org
Fire: fire@awc.org
© Copyright 2019 American Wood Council. All Rights Reserved.